Hi,
In the "safety->STCU2" section of S32K3XXRM, there is a configuration register for PLL located at STCU2->RUNSW.
Solved! Go to Solution.
Hello,
Yes, you have to enable them if you use PLL for tests.
I guess SAF already has this enabled in some run function, but in case you have your own driver you have to take care of these bits.
Best regards,
Peter
Hello,
Yes, you have to enable them if you use PLL for tests.
I guess SAF already has this enabled in some run function, but in case you have your own driver you have to take care of these bits.
Best regards,
Peter