Depth of the RXOUT FIFO in S32G2 LLCE

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Depth of the RXOUT FIFO in S32G2 LLCE

Jump to solution
355 Views
AsmId
Contributor III

Dear NXP community,

I would like to know the depth of the RXOUT fifos in S32G2 LLCE module.

I've found in the user guide only the information about the width (19bits) but not the depth (number of elements).

Thank you for your support.

Best regards,

 

Tags (2)
0 Kudos
Reply
1 Solution
240 Views
Daniel-Aguirre
NXP TechSupport
NXP TechSupport

Hi,

We apologize for the delay. We have received the following confirmation:

"

All FIFOs have a depth of 16, including the RXOUT FIFO.

"

Please, let us know.

View solution in original post

5 Replies
334 Views
Daniel-Aguirre
NXP TechSupport
NXP TechSupport

Hi,

We might be misunderstanding the overall inquiry. If so, we do apologize.

For the available information, RXOUT should be of size 16+6, as seen under the LLCE User Guide:

DanielAguirre_0-1717698559494.png

Again, we apologize if we misunderstood your request.

Please, let us know.

0 Kudos
Reply
313 Views
AsmId
Contributor III

Hi @Daniel-Aguirre ,

Thank you for your reply. I thought that 16+6 is the number of RXOUT FIFO but not the number of elements (depth) in each of this FIFO.

Best regards,

 

0 Kudos
Reply
241 Views
Daniel-Aguirre
NXP TechSupport
NXP TechSupport

Hi,

We apologize for the delay. We have received the following confirmation:

"

All FIFOs have a depth of 16, including the RXOUT FIFO.

"

Please, let us know.

207 Views
AsmId
Contributor III

Thank you for your feedback.

0 Kudos
Reply
298 Views
Daniel-Aguirre
NXP TechSupport
NXP TechSupport

Hi,

Thanks for your feedback. It seems that we misunderstood the inquiry, we do apologize.

We will confirm the depth of each FIFO, if available.

We apologize for any delay from our side.

Please, let us know.

0 Kudos
Reply