Hi,
when I want debug in the startup_S32K144.s ist not possible.
I get this Error : No source available for "Reset_Handler() at 0x69e".
In disassembly mode I can debug "Reset_Handler", but not in the startup_S32K144.s file.
What can I do that it works ?
I use the S32K144, Segger J-Link and S32DS 2018.R1
BR Lutz
Solved! Go to Solution.
Hi Jiri,
I found the problem. The Debug level for assembler files war auf „none“. I changed it and now I can set breakpoints in startup.s
Lutz
Von: jiri.kral@nxp.com
Gesendet: Donnerstag, 30. Mai 2019 09:31
An: Köhler, Lutz <lutz.koehler@acd-antriebstechnik.de>
Betreff: Re: - Re: J-Link with S32DS Problem debugging
NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: J-Link with S32DS Problem debugging
reply from Jiri Kral<https://community.nxp.com/people/jiri.kral@nxp.com?et=watches.email.thread> in S32 Design Studio - View the full discussion<https://community.nxp.com/message/1158178?commentID=1158178&et=watches.email.thread#comment-1158178>
Hi Lutz,
I just tried Hello Word - and have no issue when I put breakpoint in very first instruction in startup.S:
Are you sure that you have debug version of your code and correctly set paths to sources? If I'm correct - if debugger can't find path to source file - you can choose path to source code via button shown in source code window.
Jiri
Hi Jiri,
I found the problem. The Debug level for assembler files war auf „none“. I changed it and now I can set breakpoints in startup.s
Lutz
Von: jiri.kral@nxp.com
Gesendet: Donnerstag, 30. Mai 2019 09:31
An: Köhler, Lutz <lutz.koehler@acd-antriebstechnik.de>
Betreff: Re: - Re: J-Link with S32DS Problem debugging
NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: J-Link with S32DS Problem debugging
reply from Jiri Kral<https://community.nxp.com/people/jiri.kral@nxp.com?et=watches.email.thread> in S32 Design Studio - View the full discussion<https://community.nxp.com/message/1158178?commentID=1158178&et=watches.email.thread#comment-1158178>