TJA145芯片中的局部网络唤醒ID的功能:
目前存在的疑问是:在芯片休眠之前,配置相应的寄存器中存在问题,使得芯片不仅检测相应的固定ID和Signal,并且检测Error Frame 并进入计数,超出计数后,错误地唤醒了芯片,使得程序运行异常;
目前休眠的操作步骤是:
1.配置局部网络唤醒的ID和信号;
2.使能局部网络唤醒,使能唤醒事件;
3.清除唤醒事件;
4.进入休眠模式
位错误导致的错误帧会唤醒收发器(不在预期内),继而唤醒芯片。
敢问各位大神,我的操作步骤哪里不对吗?
已解决! 转到解答。
HI Mr.Sun
Please point out the corresponding location in this document for my question or give you ideal about this problem,because I have read this document already and could not find the measure of solving the problem,Thanks.