How to use MPC5744P NMI_B pin?

cancel
Showing results for 
Search instead for 
Did you mean: 

How to use MPC5744P NMI_B pin?

Jump to solution
417 Views
Contributor II

Hi everyone:

    I meet a problem when I use MPC5744P board(SCH-27887 REV B1, 700-27887 REV A), the board uses MC33907L as the power supply for MPC5744P, and when something goes wrong, MC33907L provides a interrupt signal which connected to the NMI_B pin on MPC5744P.

    When I read WKPU.NSR register, I found WKPU.NSR.B.NIF0 == 1, that means there is a NMI interrupt occurs and MPC5744P detects the interrput, but the program does not enter any interrupt service routine, so I cannot handle the interrupt.

    I would like to know how to configure the registers related to NMI interrupt, its better if anyone can provide an example for me.

    Apologize for my poor English, and I hope someone can help me!

Best Regards

luan

Labels (4)
Tags (2)
1 Solution
12 Views
Contributor II

Hi Daniel:

    Thank you for your help, I`ve read this thread, it helped me a lot!

luan

View solution in original post

0 Kudos
2 Replies
12 Views
NXP Employee
NXP Employee

Hi luan, 

Please check this thread - it seems to be the same thing you are looking for: https://community.nxp.com/thread/454113 

Hope this helps!

Daniel

13 Views
Contributor II

Hi Daniel:

    Thank you for your help, I`ve read this thread, it helped me a lot!

luan

View solution in original post

0 Kudos