NXP connectivity solutions for smart metering address the challenges smart cities face for reliable, secure communications for remote metering and home energy management. We enable remote metering with NAN technologies like IEEE® 802.15.4 and Wireless MBUS. Additionally, NXP fosters smart energy management inside homes with HAN technologies like ZigBee®.
Flow meters help smart cities measure the volume of natural gas or water at a specific time or over a long period. The measurement is then displayed on low-power segment LCDs, often driven by segment LCD drivers on a MCU.
Advanced flow meters incorporate RF communication interfaces for connecting to one-way or two-way RF meter reading systems.
Category Name 1: | MCU |
Product URL 1 | |
Product Description 1 | The LPC546xx MCU family is architected to be power efficient for applications that require data aggregation from several different inputs. This MCU family provides a variety of wake-up sources including the FlexComm peripherals. |
Category Name 2: | Wireless |
Product URL 1 | |
Product Description 1 | The BGS8L5 is a LNA with bypass switch for LTE receiver applications, in a small plastic 6-pin thin leadless package. It delivers system-optimized gain for diversity applications where sensitivity improvement is required. |
Product URL 2 | |
Product Description 2 | The OL2385 device is a radio frequency transceiver with an embedded MCU designed for a wide range of industrial and home applications requiring very high link budget for bidirectional RF communication. |
Product URL 3 | Zigbee and IEEE 802.15.4 wireless microcontroller with 512 kB Flash, 32 kB RAM | NXP |
Product Description 3 | The JN5169 is an ultra-low-power, high-performance wireless MCU suitable for ZigBee applications. |
Category Name 3: | Driver |
Product URL 1 | |
Product Description 1 | The PCF85133 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD) with low multiplex rates. |
Category Name 4: | Switch |
Product URL 1 | |
Product Description 1 | The NX3P2902B is a high-side load switch which features a low ON resistance P-channel MOSFET. The MOSFET supports more than 500 mA of continuous current and an integrated output discharge resistor to discharge the output capacitance when disabled. |
Product link 2 | |
Product Description 2 | The SA630 is a wideband RF switch fabricated in BiCMOS technology and incorporating on-chip CMOS/TTL compatible drivers. Its primary function is to switch signals in the frequency range DC to 1 GHz from one 50 Ω channel to another. |
Category Name 5: | Peripherals |
Product URL 1 | |
Product Description 1 | The PCF2123 is a CMOS Real-Time Clock (RTC) and calendar optimized for low power applications. Data is transferred serially via a Serial Peripheral Interface (SPI-bus) with a maximum data rate of 6.25 Mbit/s. |
Product URL 2 | |
Product Description 2 | On-chip, bipolar op amp circuitry and thin film resistor networks to provide a high output signal and temperature compensation. |
Category Name 6: | Secure |
Product URL 1 | |
Product Description 1 | A71CH is a ready-to-use secure element for IoT devices providing a root of trust at the IC level and delivers, chip-to-cloud security right out of the box, so you can safely connect to IoT clouds and services, including AWS, IBM Watson IoT™ Platform, and Google Cloud™ IoT Core without writing security code or exposing keys. |
Product | Link |
---|---|
OM13098: LPCXpresso54628 Development Board | OM13098 | LPCXpresso Development Board | LPC Microntrollers (MCUs) | NXP |
OM2385/SF001 - OL2385 Wireless sub-GHz Transceiver SIGFOX Development Kit with KL43Z | OM2385/SF001 - SIGFOX Development Kit | NXP |
OM15020: JN5169 USB Dongle for ZigBee | JN5169 USB Dongle for ZigBee | NXP |
OM3710/A71CHARD | A71CH Arduino® compatible development kit | OM3710/A71CHARD | A71CH Arduino® compatible development kit | NXP |
OM13512: Demoboard for the SPI-bus RTC PCF2123 | Demoboard for the SPI-bus RTC PCF2123 | NXP |