Development on MPC5748G

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

Development on MPC5748G

584 次查看
tapan_roy
Contributor I

Hi,

I work for a company and they are purchasing DEVKIT-MPC5748G. I am asked to develop one gateway firmware that will read the LIN data and convert it to CAN data and write on CAN Data bus, in one month time.

1. Question : Please can you help me by sharing the link to download and can reuse the LIN and CAN code to perform above data translation.

2. Which IDE shall I use to cross compile the implementation. Can I use U-Multilink-FX to flash the binary.

Please can you give me these pointers so that I can soon start the development.

Shall be eagerly waiting, Thank you in advance.

Tapan

0 项奖励
1 回复

500 次查看
Daniel_Popa
NXP Employee
NXP Employee

Hi Tapan, 

Perhaps you might want to check this list of examples: https://community.nxp.com/docs/DOC-329623#MPC5748G 

The IDE you can use is the S32 Design Studio for Power ArchitectureS32 Design Studio IDE | NXP 

0 项奖励