Hi, all.
I look for accelerometer example in interrupt mode.
How MQX RTOS knows to detect hardware interrupt from accelerometer (IRQ PTD10)?
Anybody can help me?
Solved! Go to Solution.
Hi Magnetron,
You would set up that pin as an GPIO input that supports interrupts.
Look in the DemoIO.c file in the K60 Quick Start Demo to see an example of how this was done with the push buttons on the board.
Hi Magnetron,
You would set up that pin as an GPIO input that supports interrupts.
Look in the DemoIO.c file in the K60 Quick Start Demo to see an example of how this was done with the push buttons on the board.