MPC5748G Mis-Type in Reference Manual

[kmh48301]

Hi, I have been studying Reference Manual.

Please see this one. It is from RM page 3639

I think 'start address' can't be bigger than 'end address'.

In Rm Page 3661, "Low Blocks exist in partitions 0 and 1"

and, according to Rm page 126, 

i think 

=================================================

0x00FD_8000~0x00FD_7FFF => 0x00FD_8000~0x00FD_FFFF

0x00FC_8000~0x00FC_7FFF => 0x00FC_8000~0x00FC_FFFF

=================================================

Because, I just started to study this manual, I'm not sure.

Please check

Thanks

Best regards

Phillip

[davidtosenovjan · Accepted solution]

Hi. Certainly yes, you are right. You may find ranges also in the Table 74-1.

I will report it as a documentation error. Thanks for highlighting of this issue.