Hello.
I am going to develop and program my own firmware into LPC4320FBD144 of HackRF-One device.
Btw, I can't program successfully into this CPU in MCUXpresso IDE.
I think it may be resulted from the fact that I have not proper LinkServer Flash Driver.
I am using LPC Link-2.
Of course, I could program my own firmware using the method that HackRF manual explained.
But, it is based on their specific tools which are independent on MCUXpresso IDE.
Please help me.
Hello, Pavel.
Thank you very much for your reply.
In fact, I tried with these libraries many times.
I bought LPCXpresso-4367 board, and I succeeded based on these libraries with this dev-kit.
But, I couldn't complete with LPC4320 board (using HackRF-One's ).
In this process, I thought this maybe resulted from the fact that LPC4320 has not its own flash memory and it must use external flash memory.
Because of this idea, I said about LinkServer Flash Driver.
What is my mistake ?
Best regards.
Hello,
Unfortunately, we do not have support for that board I think should go to the vendor or page from that vendor. I suggest reviewing the schematic of the board from NXP and comparing it with the other and reviewing if you need to populate some jumper.
Best regards,
Pavel
Hello,
I suggest downloading the SDK in this link LPCOpen Software for LPC43XX | NXP Semiconductors.
If you need more information please let me know.
Best regards,
Pavel