hallo, MCU S32R274 is used in my application. I am starting looking into how to program the SPT module in S32DS.
I am totally new here and struggling with the command list.
I could not figure out how to figure out the command list. As in the example for other MCU below, how people know these values for command_list?
Even I am thinking of a command ADD for A+B, how to program set ADD in SPT?
// SPT command list. Elements are modified to insert addresses
uint32_t command_list[] = {
// Initialise the OPRAM and TWRAM using PDMA command
0xa0514000, 0x40120000, 0x80000000, 0x01000004, //init complete OPRAM
0xa0511000, 0x40120000, 0x40000000, 0x01000004, //Init complete TWRAM
it is solved. thanks.
发自我的小米手机
在 "dumitru-daniel.popa" <admin@community.nxp.com>,2018年10月18日 下午7:02写道:
NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: creat my own command list
reply from dumitru-daniel.popa<https://community.nxp.com/people/dumitru-daniel.popa?et=watches.email.thread> in NXP Model-Based Design Tools for RADAR - View the full discussion<https://community.nxp.com/message/1069854?commentID=1069854&et=watches.email.thread#comment-1069854>