Dear NXP:
gpio pin配置时,flexcomm0/1/2/3/7配置为uart;配置priphera时,提示警告“工具链/IDE工程不支持FLEXCOMM USART Driver版本。所需值: 2.4.0, 实际值: 2.5.1”;
选择之后,问题栏提示如下:
问题: 工具链/IDE工程不支持FLEXCOMM USART Driver版本。所需值: 2.4.0, 实际值: 2.5.1. 工程可能没有被正确编译。
级别: 警告
类型: 验证
工具: Toolchain/IDE project
来源: Peripherals
目标: Toolchain/IDE project: cm33_core0
资源: platform.drivers.flexcomm_usart
请问这个问题如何解决?谢谢!
Hi
What version of IDE do you use? I guess you are using very old version.
The error message indication your IDE version and SDK version don't match. I suggest you try the latest MCUXpresso IDE
and latest SDK 2.10.0
https://mcuxpresso.nxp.com/en/welcome
try again.
Have a nice day
Jun Zhang