Hi people !!! Can anybody tell me the differences between LPCXpresso845MAX and LPCXpresso845MAX REV2 boards? I mean, HARDWARE differences ... Regards!
HI XAVIER ALBORNOZ,
You can download the schematic of the board in the link below LPCXpresso845-MAX Board, on the first page you have a Revision register section, where you can find what are the changes or differences between all the versions of the board.
regards,
Miguel
Hi Miguel !!! I thank you for your reply and clarification.
In fact I would like to know if the KEIL Examples available to REV1 board can be used without changes to REV2 board. May I consider this?
Regards,
Xavier
On Thursday, July 12, 2018, 12:04:20 PM GMT-3, nxf46725 <admin@community.nxp.com> wrote:
|
NXP Community |
|
Re: LPC845 BOARDS
reply from Miguel Alfonso Mendoza Espinoza in LPC Microcontrollers - View the full discussion
HI XAVIER ALBORNOZ,
You can download the schematic of the board in the link below LPCXpresso845-MAX Board, on the first page you have a Revision register section, where you can find what are the changes or differences between all the versions of the board.
regards,
Miguel
Reply to this message by replying to this email, or go to the message on NXP Community |
Start a new discussion in LPC Microcontrollers by email or at NXP Community |
Following Re: LPC845 BOARDS in these streams: Inbox |
This email was sent by NXP Community because you are a registered user.
You may unsubscribe instantly from NXP Community, or adjust email frequency in your email preferences
Hi XAVIER ALBORNOZ,
Generally, the differences between revisions are small, that does not affect the use of the examples, so that, if you are using the SKD KEIL examples of the board no matter what revision are you using they will work.
regards,
Miguel
Hi Miguel. Once more I thank you so much for your explanation.
Regards,
Xavier
On Friday, July 13, 2018, 3:59:40 PM GMT-3, nxf46725 <admin@community.nxp.com> wrote:
|
NXP Community |
|
Re: LPC845 BOARDS
reply from Miguel Alfonso Mendoza Espinoza in LPC Microcontrollers - View the full discussion
Hi XAVIER ALBORNOZ,
Generally, the differences between revisions are small, that does not affect the use of the examples, so that, if you are using the SKD KEIL examples of the board no matter what revision are you using they will work.
regards,
Miguel
Reply to this message by replying to this email, or go to the message on NXP Community |
Start a new discussion in LPC Microcontrollers by email or at NXP Community |
Following Re: LPC845 BOARDS in these streams: Inbox |
This email was sent by NXP Community because you are a registered user.
You may unsubscribe instantly from NXP Community, or adjust email frequency in your email preferences