Hi everyone,
I'm having a problem with the CAN component, I'm using Kinnetis K20, I'm adding this component to my project and I have configured, but when I do the compilation I have a problem en the file CAN.c which is inside the folder Generated_Code, I don't know why this problems appear, if someone knows why this can be possible, let me know please.
All errors are "identifier expected".
Thank you
I have attached an image with the configuration component.
Jose
解決済! 解決策の投稿を見る。
Hi,
finally I managed to resolve the problem, I don't know why a GPIO component was creating this problem to the CAN component, these components are working in different ports. I have changed the GPIO component for a bitIO component and now it works perfectly both, the CAN and the bitIO component.
Thanks
Jose
Hi Jose,
What version of CW?
Regards
Luis
Hi Luis,
I'm using 10.4 version.
Thanks
Jose
Hi,
finally I managed to resolve the problem, I don't know why a GPIO component was creating this problem to the CAN component, these components are working in different ports. I have changed the GPIO component for a bitIO component and now it works perfectly both, the CAN and the bitIO component.
Thanks
Jose
Jose,
Thanks a lot for sharing the workaround with us! Keep the good job up!
Best,
Monica.