[MWCT2013]PWM Control

[RichardT]

Dear NXP,

Could anyone provide about the PWM initial and control code for pin 45, 46, 51?

I have to control each pin to output the PWM function individually.

Thnak you.

[RichardT]

Dear XiangJun,

unfortunately, it did not work properly after I read this document.

I still want to have sample code for MWCT2013.

Thank you.

[xiangjun_rong · Accepted solution]

Hi

Pls refer to the code, which can be used for the MWCT2013 I suppose

BR

XiangJun Rong

[xiangjun_rong]

Hi,

As you know that the MWCT2013 has application code for wireless charging, so you have to check if the application code has used the pin pin 45, 46 and 51. If the three pins are not used, you can develop code to use them.

This link has eFlexPWM application code, pls refer to it.

https://community.nxp.com/t5/Digital-Signal-Controllers/Two-or-more-eFlexPWM-synchronization-for-KV4...

Hope it can help you

BR

XiangJun Rong