Where is "Bus Freq. Divider" and "FLL Mode" in Device Initialization of CW10? I`m working with MC9S08SH4CPJ.
已解决! 转到解答。
According to Jennie in tech support,
> this is a known issue in CW10.0. we will fix this issue in CW10.1 that will be released
> in the early of next year. unfortunately for now we don't have workaround for that.
> we are very sorry for that.
My personal suggestion for a workaround is this: if you can lay hands on a copy of CW 6.3 and an old PC to run it (I don't think that CW 6.3 runs under Windows 7), use its device initialization facility to create initialization files and then copy them into the CW10 project.
Best of luck,
Richly
According to Jennie in tech support,
> this is a known issue in CW10.0. we will fix this issue in CW10.1 that will be released
> in the early of next year. unfortunately for now we don't have workaround for that.
> we are very sorry for that.
My personal suggestion for a workaround is this: if you can lay hands on a copy of CW 6.3 and an old PC to run it (I don't think that CW 6.3 runs under Windows 7), use its device initialization facility to create initialization files and then copy them into the CW10 project.
Best of luck,
Richly