Is there any help documents on building netcommsw for the pwer arch?
I have created a new codewarrior bareboard project (C static library / GCC AEABI toolchain / hardware FP).
I've updated the include path to include:
"${ProjDirPath}/GeneralBuildFlags"
"${ProjDirPath}/Sources/NetCommSw/inc"
"${ProjDirPath}/Sources/NetCommSw/inc/integrations"
"${ProjDirPath}/Sources/NetCommSw/inc/cores"
"${ProjDirPath}/Sources/NetCommSw/inc/etc"
"${ProjDirPath}/Sources/NetCommSw/inc/IntrCtl"
"${ProjDirPath}/Sources/NetCommSw/inc/MemCtl"
"${ProjDirPath}/Sources/NetCommSw/inc/Peripherals"
"${ProjDirPath}/Sources/NetCommSw/inc/integrations/B4860"
"${ProjDirPath}/Sources/NetCommSw/inc/flib"
"${ProjDirPath}/Sources/NetCommSw/inc/flib/common"
"${ProjDirPath}/Sources/NetCommSw/cores/e500"
"${ProjDirPath}/Sources/NetCommSw/etc"
"${ProjDirPath}/Sources/NetCommSw/IntrCtl"
"${ProjDirPath}/Sources/NetCommSw/MemCtl"
"${ProjDirPath}/Sources/NetCommSw/integrations/B4860"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/BM"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/FM/inc"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/FM/Pcd"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/FM/Port"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/FM/MAC"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/FM/HC"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/FM/MACSEC"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/FM/SP"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/QM"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/DUART"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/FM/Rtc"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/DPAA"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/SEC"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/SEC/DCL"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/DMA"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/I2C"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/Spi"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/PCI"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/MII"
"${ProjDirPath}/Sources/NetCommSw/Peripherals/PM"
"${PA_TOOLS_HOME}\PA_Support\ewl\EWL_C\include"
"${PA_TOOLS_HOME}\PA_Support\ewl\EWL_C\include\pa"
"${PA_TOOLS_HOME}\PA_Support\ewl\EWL_C++\include"
"${PA_TOOLS_HOME}\PA_Support\ewl\EWL_Runtime\Runtime_PA\Include"
"${PA_TOOLS_HOME}\PA_Support\ewl\lib"
"${PA_TOOLS_HOME}\PA_Support\Serial\lib"
How do I include the prefix mechanism in this version of CW 10.4...
#if !__option(precompile)
#include "dflags_Debug.h" /* was "Prefix file" */
#endif
Hi, Mark Doherty
There is command line option "-prefix" as below:
Adds contents of a text file or precompiled header as a prefix to all source files.
Syntax
-prefix file
Is this what you want?
Why do not use CodeWarrior 10.3? As this is the version specified in NCSW-Release-Notes.pdf of GA4.7 for B4860.
Have a great day,
Lunmin
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------