Bonjour
Hi
I try to program a other CPU (s08ctj for example ) with the developpment kit Demo9s08QG8 but
codeWarrior don't want to do it.
The error message is : no device available
I thought that was possible with l'USB/BDM integrated on the board
please excuse my bad english
thank for your help
解決済! 解決策の投稿を見る。
Bonjour,
Unfortunately, it is not possible to program a MCU with any DEMO board.
You can program a S08QE8 MCU in a DEMOQE Board for example. But you will never be able to program a S08SH in a DEMOQE.
Bonne journée.
Maybe you want to get yourself a very-very low cost USBDM-compatible board, or even build it yourself (all you need is available.) There are several versions, so you need to read a bit about them all before you decide which one best suits your needs and pocket.
Start here:
USBDM: USBDM Debugger interface for Freescale RS08,HCS08,HCS12,Coldfire and ARM-Kinetis Devices.
merci à vous pour ces renseignements.
Bonjour,
Unfortunately, it is not possible to program a MCU with any DEMO board.
You can program a S08QE8 MCU in a DEMOQE Board for example. But you will never be able to program a S08SH in a DEMOQE.
Bonne journée.