Hello everybody,
I´m working with a MC9S08QB4 at the moment and my problem is, like the topic already said, the "Power Cycle Dialog". CodeWarrior (10.2) is telling me that the MCU is not responding. I´ve done some research about that problem and usually the first idea is to check the BDM-6Pin-Tool-Connector. I did that and have the following question:
Pin1 is connected to BKGD (PTA4) and VSS at the same time?
Because if I am not totally wrong, that is what the ReferenceManual (Rev.1, page 25) tells me.
Thanks and regards,
Ben
解決済! 解決策の投稿を見る。
Hello Ben,
The diagram that you refer to is faulty. Pin 1 of the header is meant to connect to the BKGD/MS pin alone. Pin 2 connects to ground.
Regards,
Mac
Hello Ben,
Has this fixed your issue? Don't forget to keep us posted :smileywink:
Best regards,
Monica.
That has fixed my problem, yes. Sorry for not evaluating the answer. I´m sort of a newbie here :smileywink:
Best regards,
Ben
No problem, we're happy to have you at Community! :smileygrin:
Great week!
Monica
Hello Ben,
The diagram that you refer to is faulty. Pin 1 of the header is meant to connect to the BKGD/MS pin alone. Pin 2 connects to ground.
Regards,
Mac