Hello everybody,
I have got some questions about the ADC module and it´s current consumption of the MC9S08QB8. Table8 on page14 of the datasheet (rev3, 3/2009) says, that the "Run suppy current - FEI mode, all modules on" at 1MHz and 3V is typically about 0.8mA. I will not be able to run the MCU in any LowPower-Modes, because there a continuous calculations to do.
My questions now:
1) does "all modules on" include the ADC with it´s current consumption?
2) if not, do I have to add the ADC specific supply currents (page22) to the 0.8mA?
3) does every of the 8 ADC channel take current or are those characteristics for the whole ADC module?
4) does the TemperatureSensor take additional current or does it behave like a 'normal' channel?
Thanks in advance. Regards.
Benjamin
Hi Ben,
for my experience here is:
Regards,
Salvatore