All Boards Updating RedBoot Through RedBoot

Document created by jesseg Employee on Aug 7, 2012Last modified by Jodi Paul on Mar 18, 2013
Version 2Show Document
  • View in full screen mode

Copy redboot binary to /tftpboot. In this case: redboot.bin


Load binary file to i.MX RAM memory:

RedBoot> load -v -r -b 0x100000 /tftpboot/redboot.bin

Run the loaded image

RedBoot> run 0x100000

Enable NOR, NAND or MMC flash media for Redboot. In this case, NAND is beeing used.

RedBoot> factive nand

Update RedBoot in the flash with currently running image

RedBoot> romupdate