Dears,
Can RT600 support UAC2.0? Do you have any performance report for UAC2.0 using in RT600?
If customer use DSP that RT600 inside to do audio effect handling with UAC 2.0 output, can this be work smoothly?
Thanks,
Ray
Hello Ray,
Regarding your questions please see my comments below.
Can RT600 support UAC2.0? Do you have any performance report for UAC2.0 using in RT600?
Yes, the RT600 does support UAC2.0. Actually, the USB audio examples that we provide within the SDK support UAC2.0.
If customer use DSP that RT600 inside to do audio effect handling with UAC 2.0 output, can this be work smoothly?
Yes, this can work without any problems. However, there aren't any examples of this.
Best Regards,
Victor
Hi Victor,
Thanks for your response,
Please check the SDK content as below,
BRs,
Ray Deng
Field Application
South FAE,Avnet China
18026960272
发件人: victorjimenez <admin@community.nxp.com>
发送时间: 2020年5月19日 6:34
收件人: Deng, Ray <Ray.Deng@AVNET.COM>
主题: Re: - Re: i.MX RT600 UAC2.0
NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: i.MX RT600 UAC2.0
reply from Victor Jimenez<https://community.nxp.com/people/victorjimenez?et=watches.email.thread> in i.MX RT - View the full discussion<https://community.nxp.com/message/1313767?commentID=1313767&et=watches.email.thread#comment-1313767>
Hi Victor,
There is no note say RT685 SDK do not support UAC 2.0, we will check it.
BTW, does RT106X support UAC2.0?
Thanks,
BRs,
Ray Deng
Field Application
South FAE,Avnet China
发件人: victorjimenez <admin@community.nxp.com>
发送时间: 2020年5月21日 7:06
收件人: Deng, Ray <Ray.Deng@AVNET.COM>
主题: Re: - Re: i.MX RT600 UAC2.0
NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: i.MX RT600 UAC2.0
reply from Victor Jimenez<https://community.nxp.com/people/victorjimenez?et=watches.email.thread> in i.MX RT - View the full discussion<https://community.nxp.com/message/1314972?commentID=1314972&et=watches.email.thread#comment-1314972>
Hi Ray,
Thanks a lot for your patience regarding this case. I checked this with the applications team and they told me that in the next version of the RT SDK all the audio examples will support Audio Device Class 2.0.
Regards,
Victor
Hi Vector,
Got it with many thanks,
Best Regards,
Ray Deng
AFAM
Avnet China
深圳市宝安区新安街道创业二路与留仙一路交汇处东侧创芯研发中心1栋5楼
5th Floor, Building 1, Wise R&D Center, Liuxian 1st Road cross Chuangye 2nd Road,69th Block, Boa ’an District,Shenzhen City
O +8675586342385
M +8618026960272
D +8675586342385
F +867558378.0826
avnet.com/apac<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Favnet.com%2F&data=02%7C01%7Cws.wong%40nxp.com%7Cb1694567060e40ace47208d59de6bc7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636588536688437382&sdata=%2ByRoHs0%2FqgD%2BDwbxAes4iThAy8ghHMQ1AaWisaRqYqs%3D&reserved=0>
发件人: victorjimenez <admin@community.nxp.com>
发送时间: 2020年5月26日 23:13
收件人: Deng, Ray <Ray.Deng@AVNET.COM>
主题: Re: - Re: i.MX RT600 UAC2.0
NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: i.MX RT600 UAC2.0
reply from Victor Jimenez<https://community.nxp.com/people/victorjimenez?et=watches.email.thread> in i.MX RT - View the full discussion<https://community.nxp.com/message/1317546?commentID=1317546&et=watches.email.thread#comment-1317546>
Hello Victor,
We got the information from <SDK_2.7.0_MIMXRT1064xxxxA\boards\evkmimxrt1064\usb_examples\usb_device_audio_generator\freertos\release.pdf> that the Deco code do not support UAC 2.0, do you have any example for UAC 2.0 built on i.MXRT1064?
Thanks,
Ray
Thanks, Victor,
BRs,
Ray Deng
Field Application
South FAE,Avnet China
深圳市宝安区新安街道创业二路与留仙一路交汇处东侧创芯研发中心1栋5楼
5th Floor, Building 1, Wise R&D Center, Liuxian 1st Road cross Chuangye 2nd Road,69th Block, Boa ’an District,Shenzhen City
O +8675586342385
M +8618026960272
D +8675586342385
F +867558378.0826
avnet.com<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Favnet.com%2F&data=02%7C01%7Cws.wong%40nxp.com%7Cb1694567060e40ace47208d59de6bc7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636588536688437382&sdata=%2ByRoHs0%2FqgD%2BDwbxAes4iThAy8ghHMQ1AaWisaRqYqs%3D&reserved=0>
发件人: victorjimenez <admin@community.nxp.com>
发送时间: 2020年5月5日 7:28
收件人: Deng, Ray <Ray.Deng@AVNET.COM>
主题: Re: - Re: i.MX RT600 UAC2.0
NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: i.MX RT600 UAC2.0
reply from Victor Jimenez<https://community.nxp.com/people/victorjimenez?et=watches.email.thread> in i.MX RT - View the full discussion<https://community.nxp.com/message/1307025?commentID=1307025&et=watches.email.thread#comment-1307025>