我在使用RT106F的开发板(软件是:RT106F_DEMO)
开发板中的人脸定位,我目前只找到了人脸的矩形定位,但是据我了解,咱们的开发板使用的是五点定位(双眼、鼻、嘴角),目前我在程序中只看到了脸部矩形坐标(4点),但是并没有找到五点坐标的获取接口。
请问这五点的坐标能在哪里获取到呢?
Solved! Go to Solution.
Hello,
The square was implemented to let the user know if the face has been registered or not. The red square is not registered the green square is registered. The points of reference for facial recognition is part of the algorithm of the Oasis-Lite model. However, this model is not open source and cannot be customized.
Have a great day,
Victor
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct"button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
Hello,
The square was implemented to let the user know if the face has been registered or not. The red square is not registered the green square is registered. The points of reference for facial recognition is part of the algorithm of the Oasis-Lite model. However, this model is not open source and cannot be customized.
Have a great day,
Victor
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct"button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------