MCUxpresso IDE does not detect cm4 on MIMXRT1160-EVK

[kunf]

MCUxpresso IDE does not detect cm4 on MIMXRT1160-EVK

I am getting to grips with the 1160. For a first test, I loaded various examples. I noticed that examples with cm4 do not work because the correct target is not found. Strangely, however, programmes where cm7 and cm4 are linked do work.

How can I solve this issue?

[kunf · Accepted solution]

I found an answer by my self under the following link:

https://community.nxp.com/pwmxy87654/attachments/pwmxy87654/mcux-blogs/123/1/RT1170_BriefOverview_v1...

It's a brief overview for the RT1170 but those MCU's seem to be similar in that case.