自己画板子,打板做出来一块,以IMX6D7C和FPGA为主的电路板,现在想通过IAR FOR ARM软件,下载程序(jlink)到电路板,让imx6d7c与FPGA通过EIM,实现数据通讯。
(I draw a board by myself and create a circuit board based on IMX6D7C and FPGA. Now I want to download a program (jlink) to the circuit board through IAR FOR ARM software, so that imx6d7c and FPGA can communicate with each other through EIM.)
Basically, we don't support IAR and Jlink using with i.MX6Q.
Normally, we use MFGTOOL to program the images.