I just finished following the procedure described at Build Ubuntu For i.MX8 Series Platform to add Ubuntu on top of the Yocto rootfs (using Ubuntu-i.MX8-weston.pdf). However, after making these changes, I no longer have access to my ov5640 camera module. At boot time, I interrupt the boot and use 'setenv fdt_file fsl-imx8qxp-mek-ov5640-rpmsg.dtb' to load the correct device tree for the camera module. Before adding Ubuntu, the camera was always at /dev/video4. Let me know if there's any system info needed to diagnose the problem. Thanks!
Hello,
Unfortunately, i.MX8QX is still in pre-production the BSP and the whole support may be subject to change. What I suggest you go with your DFAE. He could help you with this problem. I apologize for the inconvenience this may cause you.
Best regards,
Diego.