kitpfgui(Version 4.1)

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

kitpfgui(Version 4.1)

跳至解决方案
1,561 次查看
User_mmpf
Contributor I

Hi, 

I am using the kitpfgui(Version 4.1) for the first time. I have not yet connected the target board. For now, I am trying to observe voltage and current values of the PMIC on kit. But whenever I am enabling the target device, the GUI hangs. I have tried the software in Windows 7 and 10. Screenshot attached. Any procedure that I am doing wrong?

Thanks for the help in advance!

0 项奖励
1 解答
1,522 次查看
guoweisun
NXP TechSupport
NXP TechSupport

Because you don't have EVB or socket connection,so you can't  navigate it!

在原帖中查看解决方案

0 项奖励
7 回复数
1,525 次查看
guoweisun
NXP TechSupport
NXP TechSupport

I remembered that you can try to click 'OTP configuration' then click 'update from socket',you can get your desired sequence.

0 项奖励
1,524 次查看
User_mmpf
Contributor I

I am unable to navigate to any tabs in the GUI. Is it possible to have the previous version for download?

0 项奖励
1,523 次查看
guoweisun
NXP TechSupport
NXP TechSupport

Because you don't have EVB or socket connection,so you can't  navigate it!

0 项奖励
1,529 次查看
guoweisun
NXP TechSupport
NXP TechSupport

You can connect with EVB then click 'OTP configuration' then give me the picture.

0 项奖励
1,527 次查看
User_mmpf
Contributor I

We do not have a EVB currently. Target board is yet to be fabricated. I am using this kit to get familiar with working of the PMIC and verify sequencing. 

 

0 项奖励
1,552 次查看
guoweisun
NXP TechSupport
NXP TechSupport

You must connect with the EVB then click Enable.

0 项奖励
1,531 次查看
User_mmpf
Contributor I

If only contents of PMIC on kit has to be checked, what should be done?

Currently I want to verify the sequencing alone.

0 项奖励