LS1021A IoT Gateway Reference Design
- Included in Kit
- Linux BSP and OpenWRT
- Reference Design (schematics, layout and BOM available)
- HW Quick Start Guide and User's Guide
This Product Is Probably of Interest If You:
- Need a ready to use high capability IoT Gateway Reference Platform
- Need built-in WiFi and Arduino connectivity
- Want a ready to manufacture HW design
Key HW Features:
- 1 Gb QSPI NOR Flash
- 1 GB DDR3L
- SDHC slot—up to 32 GB 4 GB populated
- 1x One Gb/s Ethernet (SGMII)
- 1x One Gb/s Ethernet (RGMII)
- 2x mini PCIe (x1) slots
- 1x mSATA slot
- 1x Terminal (USB to UART)
- x Four wire LP-UART to Arduino connector (Thread, ZigBee, Bluetooth, etc.)
• Muxed LCD/QE interface 24-bit LVDS LCD interface QE UART to header for PROFIBUS or RS485 (external transceiver required)
• USB 3.0 2x ports—USB-A 2x ports to mini PCIe slots
• 13x GPIO or 8x FTM (PWM)
• 6x Interrupts
• 1x SPI
• I2C1 bus Board EEPROM Boot EEPROM Arduino Connector Sensors/PHYs, etc., TBD
• I2C2 GPIO expansion ADC Sensors/PHYs, etc., TBD
- Certification: FCC Class B and CE
What this Product is All About
Product Diagram(s)
Click here to Buy the LS1021A IoT Gateway Reference Design
IoT Physical Components
Gateways