Hi ,
In our design we are planing to use this NFC IC "MFRC522". so requsting to share any reference design file to understand the circuit design.
Thanks.
解決済! 解決策の投稿を見る。
Hello Ram_RAM,
I think that this page could help you: https://www.nxp.com/products/rfid-nfc/mifare-hf/mifare-desfire/pegoda-contactless-smart-card-reader-...
This reader is based on the MFRC523 which is essentially the same as MFRC522. The difference is only in supported standards.
The reference design can be found here:
BR
Tomas
Hello Ram_RAM,
As the MFRC522 is not recommended for new designs I would suggest going for MFRC63003HN.
MFRC63003HN: https://www.nxp.com/part/MFRC63003HN#/
The MFRC63003HN is based on the CRLC663 family, so there is a full package of support materials (including reference design) available.
BR
Tomas
Hello Ram_RAM,
I think that this page could help you: https://www.nxp.com/products/rfid-nfc/mifare-hf/mifare-desfire/pegoda-contactless-smart-card-reader-...
This reader is based on the MFRC523 which is essentially the same as MFRC522. The difference is only in supported standards.
The reference design can be found here:
BR
Tomas