Hi,
I have installed KDS 1.1 and MQX 4.1.1
I have tried to compile MQX libraries by dragging (C:\Freescale\Freescale_MQX_4_1\build\kwikstikk40x256\kds\build_libs.wsd) file into project explorer of KDS but it was not possible.
Also I have tried to compile MQX libraries with bat file (C:\Freescale\Freescale_MQX_4_1\build\kwikstikk40x256\make\build_gcc_arm.bat) but error occurs:
'mingw32-make' is not recognized as an internal or external command, operable program or batch file
Press any button to continue.
Am I missing something?
Thank you
已解决! 转到解答。
Hi Eric_t d,
Unfortunately in KDS is not possible open the libraries using drag and drop files.
You need to follow the steps that you can find in the MQX_KDS_Getting_Started located at the path: C:\Freescale\Freescale_MQX_4_1\doc\tools\kds
In addition please check the attached video as a guide. This video shows how to build a BSP usin KDS.
I hope this helps :smileywink:
Have a great day,
Sol
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi Eric_t d,
Unfortunately in KDS is not possible open the libraries using drag and drop files.
You need to follow the steps that you can find in the MQX_KDS_Getting_Started located at the path: C:\Freescale\Freescale_MQX_4_1\doc\tools\kds
In addition please check the attached video as a guide. This video shows how to build a BSP usin KDS.
I hope this helps :smileywink:
Have a great day,
Sol
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------