Hi All,
I am using MQX 3.8 in my application. During the initial development stage we had issues with
RTCS as the RTCS by default was not correctly configured. Can anyone please advise a correct configuration for high
Ethernet usage ?
Also if someone could provide some information how the following are related with each other will really help :Rx-Tx ring length, RTCSPCB and msgpool.
Default settings:
#define BSPCFG_RX_RING_LEN 8
#define BSPCFG_TX_RING_LEN 4
_UDP_max_queue_size = 1;
_RTCSPCB_init = 4
_RTCSPCB_grow = 0;
_RTCSPCB_max = 4;
_RTCS_msgpool_init = 8
_RTCS_msgpool_grow = 2
_RTCS_msgpool_limit = 8
#define ENET_FRAMESIZE_MAXDATA 1500
Modified settings:
#define BSPCFG_RX_RING_LEN 4
#define BSPCFG_TX_RING_LEN 4
_UDP_max_queue_size = 5;
_RTCSPCB_init = 4
_RTCSPCB_grow = 2;
_RTCSPCB_max = 6;
_RTCS_msgpool_init = 8
_RTCS_msgpool_grow = 2
_RTCS_msgpool_limit = 8
#define ENET_FRAMESIZE_MAXDATA 600 /*The reason for this is our max packet size is always less than 600 */
Thanks,
Mohsin
Hi,
I am also facing similar issues. I also need to know information on how these are related : Rx-Tx ring length, RTCSPCB and msgpool. This will realy help in configuring the RTCS correctly.
Syed