********************************************************************************
* Detailed Description:
*
*
* This example shows usage of FlexPWM and Sine Wave generator (SGEN) modules.
* The setting is selected in the way to have a PWM output signal synhronized with
* SGEN output signal. This is necessary for resolver usage in motor control appls.
*
* See attached Excel sheet for calculation of parammeters used here (AUX0_clk_DIV0,
* AUX0_clk_DIV1, SGEN_IOFREQ, PWM_PRESCALER, PWM_MODULO).
*
* This example is set for 2.44140625 kHz SGEN/PWM frequency.
*
*
* ------------------------------------------------------------------------------
* Test HW: MPC57xx
* Maskset: 1N65H
* Target : internal_FLASH
* Fsys: 200 MHz PLL with 40 MHz crystal reference
*
* EVB connection:
*
* P20.1 - D[7] .. SGEN output
* connected to FEC PHY's MIIMODE input on motherboard,
* to see full amplitude remove J26
*
* P8.12 - A[11] .. FlexPWM A[0] output
* P8.11 - A[10] .. FlexPWM B[0] output
*
*
********************************************************************************
