how to run LPCXpresso Development Board

[frank_pan]

Hi,

I received a LPCXpresso Development Board for LPC5460x MCUs, however no power supply and cable included.  How should I run this demo board?  Thanks for your help.

[frank_pan]

Hi Sol,

Thanks for your reply.  However when I connect the mini USB cable with the power (it is tested with my other device), the board didn't turn on and no any lights were on either.

Do you know what could be the cause of the problem?  How should I trouble shoot this issue?

Thanks,

Frank

[frank_pan · Accepted solution]

It works now.  J1 doesn't work, so I use J8 for power supply.

[soledad]

Hi,

You need to connect a micro USB cable from connector J8 or J1 to a power source (computer or power supply).

This USB cable is not included in the board. 

You can check more information about the board connection in the user guide: 

https://www.nxp.com/docs/en/user-guide/UM11035.pdf 

Have a great day,
Sol

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------