uart using CTS and RTS

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

uart using CTS and RTS

725 次查看
davidmartínezag
Contributor I

hello, i have a trouble using CTS and RTS. I used the normal configuration with interrupt from the KMSWDRVAPIRM_SW's drivers and go well, but when I try it using the other way, I am not sure if it go well. My microcontroller belong to MKMxxZxxACxx5RM's family. Just making the configuration of the CTS and RTS, I did it using UARTx_MODEM.

Any idea?

Thanks for advance.

0 项奖励
3 回复数

542 次查看
isaacavila
NXP Employee
NXP Employee

Hi David,

Are you still having this issue?

Best Regards,

Isaac

0 项奖励

542 次查看
davidmartínezag
Contributor I

sorry for not responding before, i had holidays. Finally i got to find a solution. Thanks.

0 项奖励

542 次查看
isaacavila
NXP Employee
NXP Employee

Hello David,

Could you attach your project? Need to see your UART configuration.

Also, I would like to know it your are using TWR-KM34Z50MV3 hardware.

Best Regards,

Isaac

0 项奖励