I have the FRDM-K20D50M platform and would like an example project that partitions the flex memory for use as non-volatile variables using CodeWarrior and Processor Expert. are there any examples out there?
I would recommend customer to download Kinetis TFS Flash Driver software from below link: http://cache.freescale.com/files/32bit/software/C90TFS_FLASH_DRIVER.exe After the installation, customer could find NormalDemo project for K20 product located at below folder: C:\Program Files\Freescale\Standard Software Driver vBeta033\C90TFS\Demos\K20\NormalDemo
Jennie
I imported the NormalDemo project but can not get it to build. Is there anything I need to do special as I import the project? I am using CW 10.4
this is the console output
**** Build of configuration RAM_16KB for project demo_normal_MK20DX128xxx5 ****
C:\Freescale\CW MCU v10.4\gnu\bin\mingw32-make -j8 all
mingw32-make: *** No rule to make target `C:/CW_workspace/config_files/16KB_Ram.ld', needed by `explicit-dependencies'. Stop.
regarding error: mingw32-make: *** No rule to make target `C:/CW_workspace/config_files/16KB_Ram.ld', needed by `explicit-dependencies'. Stop.
please go to CW IDE project menu "project", "clean...". then build the project again. this should fix the problem
to get the projects imported I had to not check the box "copy to workspace" What is with that?
thanks for the link. It looks like I should beable to keep busy this afternoon!