I have created a project for MK60DN512ZVLQ10 using FNET 2.1.1 example shell demo application.
But the shell demo app is created for twr- mk60n512 board having MK60DN512VMD100 processor(BGA package).
So I have changed my processor settings and default UART settings.
Now UART is working fine but in Hyperterminal I am getting Link Status: unconnected .
Is there any changes to be done in any file if processor of same family I am using, particularly Pin change requirements.
Thanks and regards
Arun
Hello Arun,
Check the jumper connection i.e J2 and J3 u keep it for 50Mhz and J12 in RMII mode then execute your programs...If ur board is of 120Mhz i.e MK60F120M then use K70 example code...Or else better u down;load the latest FNET2.5...
Regards,
Tushar M
Hi Arun,
Those packages (144 BGA and 144LQFP) will have the same pinout, so no pin changes are needed.
Are you trying to run this code on a new custom board? Or are you just changing the software and still trying to run on a TWR-K60N512 board?
-Anthony