Can I use the ST-Link/v2 or the MiniProg3 programmer to flash a WCT1x1x?

[miguel_herrera]

Hello,

I would like to know if I can flash the MP-A11 (WCT-15W1CFFPD) V1.0 Wireless Charging Evaluation Board IC, which is a WCT1x1x, using the STM programmer ST-Link/v2 or the Cypress programmer MiniProg3.

[xiangjun_rong]

Dear Miguel Herrera,
I do NOT think that you can use the ST-Link/v2 or the MiniProg3 programmer to flash a WCT1x1x, you can use the USBTAP device or Multilink Universal device to download code to flash and debug.
USBTAP link:
https://www.nxp.com/design/software/development-software/codewarrior-development-tools/run-control-d...

Multilink Universal device:
http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320168&productTab=1

You can use CodeWarrior for MCU v er11.x to download/debug.
https://www.nxp.com/design/software/development-software/codewarrior-development-tools/codewarrior-l...

Hope it can help you

[miguel_herrera]

Thanks Xiangjun!