56F800 development on Linux platform

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

56F800 development on Linux platform

跳至解决方案
648 次查看
Joseph_Casey
Contributor I

Greetings.

I am contemplating a project using MC56F8006/MC56F8002 DSC and would like to use FOSS development software on Linux. It is likely that the project code would be larger than the size offered by the free starter package, and the version of CodeWarrior available seems to be for Windows, so is there anything available for this DSC on Linux?

Joseph Casey.

0 项奖励
1 解答
608 次查看
Lorenzo_Mch_IT
Contributor IV

AFAIK there are not FOSS toolchains for NXP's MC56F8xxxxx products.
Years abo there was a toolchain by Cosmic Software for products using 56800/E cores that supported both Windows and Linux
(here you can find the link to their OLD website: https://www.cosmicsoftware.com/56k_compiler_des.php )

But there is no trace of it in the new website: https://cosmic-software.com/products.php

I guess it has been discontinued.

在原帖中查看解决方案

0 项奖励
2 回复数
609 次查看
Lorenzo_Mch_IT
Contributor IV

AFAIK there are not FOSS toolchains for NXP's MC56F8xxxxx products.
Years abo there was a toolchain by Cosmic Software for products using 56800/E cores that supported both Windows and Linux
(here you can find the link to their OLD website: https://www.cosmicsoftware.com/56k_compiler_des.php )

But there is no trace of it in the new website: https://cosmic-software.com/products.php

I guess it has been discontinued.

0 项奖励
601 次查看
Joseph_Casey
Contributor I

Thank you Lorenzo. I emailed Cosmic with an inquiry.

I had a C compiler for the 68HC11 back in the day, and it came on a 5.25 inch floppy disk. It may well have been from Cosmic.

0 项奖励