How to use CodeWarrior 5.2 for MC9S12XEG384 ?

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

How to use CodeWarrior 5.2 for MC9S12XEG384 ?

1,190 次查看
simhyeongjun
Contributor II

How can I create project for MC9S12XEG384 ?

I use CWS12v5.2 version.

This version didn't provide MC9S12XEG384 device.

Please recommend the solution.

160001_160001.jpgproject.jpg

标签 (1)
0 项奖励
3 回复数

669 次查看
TICS_Fiona
NXP Employee
NXP Employee

Hello Adam

Please refer to the link below to support missing derivatives in CW5.2:

https://community.nxp.com/thread/430483

 

 

Best Regards

Fiona Kuang

TIC - Technical Information Center

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Mark Correct button. Thank you!

---------------------------------------------------------------------------------------------------------------------

0 项奖励

669 次查看
simhyeongjun
Contributor II

Dear Fiona Kuang,

Thank you for reply.

I review your recommend link.

But I couldn't find MC9S12XEG384.

Best Regards,

ADAM Sim

0 项奖励

669 次查看
TICS_Fiona
NXP Employee
NXP Employee

Hello Adam

You can select MC9S12XEQ384 for your development.  MC9S12XEG384 has same memory map with MC9S12XEQ384 and almost the same peripheral module, only have fewer CAN interface.

For details, please refer to S12XE Family Data Sheet:

http://www.nxp.com/files/microcontrollers/doc/data_sheet/MC9S12XEP100RMV1.pdf 

Hope this helps!


Best Regards
Fiona Kuang
TIC - Technical Information Center