Hello everyone!
I'm getting started to use MC9S08PA4.
Has someone an example project?
I need it to know how to initialize the Interrupt Vector Table, timer and the ADC.
Thank you!
Hi
You can use the samples code for the TWR-S08PT60 , the S08PA family is almost the same , only the PA does not have the TSI module, you can find the lab code on the following link
Please also check the TWR‐S08PT60 Lab Guide
the lab 2 use the ADC
Please let me know if you need any specific sample code
regards
Vicente Gomez
Hello Pedro!
Thank you for your reply.
By surfing the NXP web site I found the sample code for TWR-S08DC-PT60 that is usefull for what I've to do.
Best regards,
Geremia De Sarno
never-displayed
