HOWTO: Use RAppID BL tool with MPC5744P EVB

Document created by Jiri Kral Employee on Dec 19, 2018Last modified by Mike Doidge on Jan 18, 2019
Version 6Show Document
  • View in full screen mode

1. Modify your application to be compatible with RAppID BL tool. Add memory space for delay and application key in linker file (modified hello world project is in attachment):  

 

 

Add data for this sections in your app (for example in main.c file):

 

 

2. Flash MPC5744P.rbf file into MCU. You can create new empty project or use existing one. Start debug Configurations and Browse MPC5744P.rbf file (located in [YOUR_RAPPID_INSTALL_FOLDER]\RBF_Files. Start debug session. 

 

 

3. Modify your EVB - add jumper wire from J3-4 to J2-16  and J3-2 to J2-14. RAppID uses UART0 and to USB is connected UART1.

 

 

 

4. Start RAppID BL tool, select COM port where EVB is connected,  choose your s-record file and Start Boot Loader:

Outcomes