VDD_SNVS_DIG is 0(low)...?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

VDD_SNVS_DIG is 0(low)...?

996 Views
972794
Contributor I

when SNVS_IN and SNVS_ANA is high in custom board but VDD_SNVS_DIG is 0 could you help us to make high 

0 Kudos
Reply
3 Replies

979 Views
RaRo
NXP TechSupport
NXP TechSupport

Hello @972794,

Just for double check, are you using an RT1170? If not, could you please tell us which microcontroller are you using?

Also, have you checked the Hardware Development Guide for the MIMXRT1160/1170 Processor? If not, could you please take a look to it? It could be helpful.

Best regards, Raul.

0 Kudos
Reply

920 Views
972794
Contributor I

I am using MIMXRT1176CVM8A this processor

0 Kudos
Reply

901 Views
RaRo
NXP TechSupport
NXP TechSupport

Hello @972794,

i.MX RT1170 Crossover Processors Data Sheet for Industrial Products mentions that the power rail VDD_SNVS_DIG is controlled by software:

RaulRomero_0-1692048335923.png

[IMXRT1170IEC. Section 4.2.1.1. Power-up sequence]

You could turn on and off the power rail by software with function PMU_SnvsDigLdoInit and PMU_SnvsDigLdoDeinit of driver fsl_pmu.c in the MIMXRT1176's SDK which you could download it here: Welcome | MCUXpresso SDK Builder.

Best regards, Raul.

0 Kudos
Reply