App note on booting RT from raw NAND?

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

App note on booting RT from raw NAND?

309件の閲覧回数
hns80
Contributor V

Is there an app note or example on how to configure an RT106x/RT107x to boot from (non-serial) NAND?

I found bits and pieces of information, but haven't found all of the information presented in one location. It would be nice if it also included an example.

 

0 件の賞賛
1 返信

234件の閲覧回数
diego_charles
NXP TechSupport
NXP TechSupport

Hi @hns80 

Many thanks for your patience. 

As far I know, we currentyl do not have an NXP released appnote, but, I think this article from our colleague @jay_heng can help :

Raw NAND startup of NXP i.MX RT1xxx series MCU  (https://www.cnblogs.com/henjay724/p/9173425.html )

It is in Chinese but you can translate it to English.

For generating ang image to boot from parallel (RAW ) NAND you can use his MCU Boot Utility.

Also, our MCUXpresso team added NAND (parallel and serial ) support t to the MCUxpresso Secure Provisioining tool  v7.0.

diego_charles_0-1694988369122.png

This support is relatively new on the tool and it was introduced for RT117x. See the tool's user guide  MCUXSPTUG for NAND booting details. 

All the best,

Diego

 

0 件の賞賛