Using the CSI inputs on IMX6DQCEC

取消
显示结果 
搜索替代 
您的意思是: 
已解决

Using the CSI inputs on IMX6DQCEC

跳至解决方案
603 次查看
davidbrooks
Contributor I

Hi,

I'd like to drive the CSI inputs from a DSI (Display Serial Interface: in effect, serialized BT.565) signal source, but from what I can see, the serial camera inputs only accept proprietary signal standards such as MIPI. Will DSI work, or alternatively, are there any other public serial data standards which CSI can accept?

Regards & TIA

0 项奖励
1 解答
297 次查看
weidong_sun
NXP TechSupport
NXP TechSupport

Hello,David,

      There are 3 kinds of camera interface:

(1)CS0 port (parallel interface)

CSI0.png

(2)CS1 port (parallel interface)

CSI1.png

(3)MIPI port (serial interface)
MIPI.png

     In addition, DSI port is display output . Not camera signal input .

Regards,

Weidong

在原帖中查看解决方案

0 项奖励
2 回复数
298 次查看
weidong_sun
NXP TechSupport
NXP TechSupport

Hello,David,

      There are 3 kinds of camera interface:

(1)CS0 port (parallel interface)

CSI0.png

(2)CS1 port (parallel interface)

CSI1.png

(3)MIPI port (serial interface)
MIPI.png

     In addition, DSI port is display output . Not camera signal input .

Regards,

Weidong

0 项奖励
297 次查看
davidbrooks
Contributor I

Many thanks, Weidong.

Those picture make it all clear.

Regards

0 项奖励