Unknown values at the start of i.MX 8MM EVK's QSPI imx-boot

取消
显示结果 
搜索替代 
您的意思是: 

Unknown values at the start of i.MX 8MM EVK's QSPI imx-boot

143 次查看
kanimozhi_t
Contributor V

Hi Team,

In i.MX 8M Mini EVK, we've generated the QSPI image by adding the configuration “UBOOT_CONFIG= fspi" in "local.conf" file.

As normal, the QSPI image address is started after 0x1000 address but in our image initial address having some (constant) value. The values shown in below screenshot:

kanimozhi_t_0-1653556423452.png

1. Is this initial value normal?

2. If so, what are those?

3. If not, how can we remove/clean that?

Thanks in advance.

0 项奖励
0 回复数