Unknown values at the start of i.MX 8MM EVK's QSPI imx-boot

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

Unknown values at the start of i.MX 8MM EVK's QSPI imx-boot

325件の閲覧回数
kanimozhi_t
Contributor V

Hi Team,

In i.MX 8M Mini EVK, we've generated the QSPI image by adding the configuration “UBOOT_CONFIG= fspi" in "local.conf" file.

As normal, the QSPI image address is started after 0x1000 address but in our image initial address having some (constant) value. The values shown in below screenshot:

kanimozhi_t_0-1653556423452.png

1. Is this initial value normal?

2. If so, what are those?

3. If not, how can we remove/clean that?

Thanks in advance.

0 件の賞賛
0 返答(返信)