Hi Team,
Need your inputs here.
I want to toggle few PINS of IMX8mm based on signal and operations.
Like sometimes i have to mute the Amplifier. for that I have pull HIGH gpio3_IO24. LED to turn ON /OFF for sometimes. How to play with GPIO . which driver we can use in NXP code base Android 11.
Can you provide inputs here, how we can toggle these pins and In which driver we can do that.
Please provide example if possible.
SD_GPIO (SHUTDOWN) | SAI5_RXD0 | GPIO3_IO21 |
Fault_GPIO | SAI5_RXFS | GPIO3_IO19 |
PLIMIT | SAI5_RXD2 | GPIO3_IO23 |
MUTE_GPIO | SAI5_RXD3 | GPIO3_IO24 |
CODEC_20W_RESET | SAI3_RXFS | GPIO4_IO28 |
CODEC_0.8W_RESET | SAI1_RXC | GPIO4_IO1 |
Hi Team,
Please update on above case.
You may take the gpio-leds as an example.
in the dts file.
And the driver is:
https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/leds/leds-gpio.c?h=lf-5.10.y