Hi,
Board used: IMX6SXSABRESD
Kernel image: It's yocto build based on latest IMX yocto project user guide
kernel version: 4.9.88
After a fresh boot up, SDIO card is inserted into SDIO 3.0 slot(J3) of the board.
It's showing up the SDIO initialization messages and unable to detect the card
Please find the attached log files.
bootlog.txt: Contains the kernel bootup prints
sdio_init_failure.txt: It's a sdio card detection failure log
Thanks,
venkatesh
Hi venkatesh
for sd3 one can check linux/arch/arm/boot/dts/imx6sx-sdb-btwifi.dts
imx6sx-sdb-btwifi.dts\dts\boot\arm\arch - linux-imx - i.MX Linux kernel
supported wifi modules are described on
wireless.murata.com/eng/products/rf-modules-1/wi-fi-bluetooth-for-freescale-i-mx.html
For other modules one will have to ask driver from module vemdor for Linux L4.9.88.
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------