Hi,
I want to debug demo project of freeRTOS for imx6ul.I am using IAR Embedded Workbench (7.60 version ) tool ,J-ling(SEGGER),imx6ul-evk board for my development.I have downloaded the freeRTOS source code from FreeRTOS - Free RTOS Source Code Downloads, the official FreeRTOS zip file release download but my board is not there in the FreeRTOS_V9.0.0rc2->FreeRTOS->demo code so my question is can i customize any demo code for my processor?If possible than please give your idea.
Thanks
Raj
Hi Raji
in general one can try to reuse SoloX version, changing headers for other processor
FreeRTOS_BSP_i.MX6SX - Windows installer (REV 1.0.0)
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi igor
Thanks for the reply
I don't know for which headers you are talking about .I open the hello world project but unable to load .out through the JTAG on my imx6ul-evk board because of lots of change require i think to make it work so if you have idea than plz share it.If u have any another way for imx6ul processor than tell me that also.
Thanks
Raj
that link in restricted community area, you can ask local fae to
provide access. Publicly available is AN5229, with the same content
http://cache.nxp.com/files/32bit/doc/app_note/AN5229.pdf
Best regards
igor
Hi igor
I want to know information about freeRTOS related things only.In http://cache.nxp.com/files/32bit/doc/app_note/AN5229.pdf document they are creating projects on ARM DS only no where i found about rtos.I want to go through freeRTOS codes becoz other RTOS is more costly for me.
Thanks
Raj