Question, i.MX6SX USB design.

キャンセル
次の結果を表示 
次の代わりに検索 
もしかして: 

Question, i.MX6SX USB design.

260件の閲覧回数
SLICE
Contributor IV

Dear team,

I would like to ask about HW/SW design around USB of i.MX6SX board.

My customer plans to use i.MX6SX for their board.

Because their board will be used for Automotive, they think that something like protection circuitry is needed for USB(OTG and HOST) design.

(1)

Is it possible to provide something like reference design around USB HW circuitry in the case of using i.MX6SX for Automotive?

(2)

And they will use USB connector which the impedance value is not guaranteed.

In case of that, could you show me what is needed to communicate stably in the viewpoint of design? (eg. Is it needed to communicate with USB1.1 only?)

Thanks,

Miyamoto

ラベル(1)
0 件の賞賛
1 返信

137件の閲覧回数
CarlosCasillas
NXP Employee
NXP Employee

Hi Miyamoto,

For USB hardware design references, you could check all the USB-related sections of the “Hardware Development Guide for i.MX 6SoloX Application Processors” document, available at the following link:

http://www.nxp.com/assets/documents/data/en/user-guides/IMX6SXHDG.pdf


Hope this will be useful for you.
Best regards!
/Carlos
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

0 件の賞賛